dmesg - Zstd Compression

Return To Zstd Compression System Information

Linux version 4.14.0-999-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201711112101 SMP Sun Nov 12 02:03:10 UTC 2017
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000038d5ffff] usable
BIOS-e820: [mem 0x0000000038d60000-0x0000000039abdfff] reserved
BIOS-e820: [mem 0x0000000039abe000-0x0000000039d88fff] usable
BIOS-e820: [mem 0x0000000039d89000-0x000000003a92dfff] ACPI NVS
BIOS-e820: [mem 0x000000003a92e000-0x000000003b159fff] reserved
BIOS-e820: [mem 0x000000003b15a000-0x000000003b1befff] type 20
BIOS-e820: [mem 0x000000003b1bf000-0x000000003b1bffff] usable
BIOS-e820: [mem 0x000000003b1c0000-0x000000003b245fff] reserved
BIOS-e820: [mem 0x000000003b246000-0x000000003bffffff] usable
BIOS-e820: [mem 0x000000003c000000-0x000000003dffffff] reserved
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x3b156218  ACPI=0x3a595000  ACPI 2.0=0x3a595000  SMBIOS=0xf05e0  SMBIOS 3.0=0x3b01e000  MPS=0xfca20 
random: fast init done
SMBIOS 3.0.0 present.
DMI: MSI MS-7A54/X99A WORKSTATION (MS-7A54), BIOS 1.0C 08/05/2016
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 000040000000 mask 3FFFC0000000 uncachable
  2 base 380000000000 mask 3FC000000000 uncachable
  3 base 00003F000000 mask 3FFFFF000000 uncachable
  4 base 0000E0000000 mask 3FFFF0000000 write-through
  5 base 0000F0000000 mask 3FFFFE000000 write-through
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcce0-0x000fccef] mapped at [fffffffffd240ce0]
esrt: Reserving ESRT space from 0x000000003b156218 to 0x000000003b156250.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff963840097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x294523000, 0x294523fff] PGTABLE
BRK [0x294524000, 0x294524fff] PGTABLE
BRK [0x294525000, 0x294525fff] PGTABLE
BRK [0x294526000, 0x294526fff] PGTABLE
BRK [0x294527000, 0x294527fff] PGTABLE
BRK [0x294528000, 0x294528fff] PGTABLE
BRK [0x294529000, 0x294529fff] PGTABLE
BRK [0x29452a000, 0x29452afff] PGTABLE
BRK [0x29452b000, 0x29452bfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x2ddba000-0x30ff4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003A595000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A595098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000003A5C8EC0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000003A5951D8 033CE5 (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x000000003A92CF80 000040
ACPI: APIC 0x000000003A5C8FD0 000100 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000003A5C90D0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000003A5C9118 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000003A5C91B8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x000000003A5C91F8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x000000003A5C9568 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: HPET 0x000000003A5C95B0 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x000000003A5C95E8 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x000000003A5C9678 00002D (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x000000003A5C96A8 001158 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x000000003A5CA800 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x000000003A5CA840 015307 (v02 ALASKA PmMgt    00000001 INTL 20120913)
ACPI: NITR 0x000000003A5DFB48 000071 (v02 ALASKA A M I    00000001 INTL 20091013)
ACPI: BGRT 0x000000003A5DFBC0 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: DMAR 0x000000003A5DFBF8 0000DC (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: ASF! 0x000000003A5DFCD8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bffd4000-0x4bfffefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x00000004bfffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000038d5ffff]
  node   0: [mem 0x0000000039abe000-0x0000000039d88fff]
  node   0: [mem 0x000000003b1bf000-0x000000003b1bffff]
  node   0: [mem 0x000000003b246000-0x000000003bffffff]
  node   0: [mem 0x0000000100000000-0x00000004bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bfffffff]
On node 0 totalpages: 4169093
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 3640 pages used for memmap
  DMA32 zone: 232934 pages, LIFO batch:31
  Normal zone: 61440 pages used for memmap
  Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb000020 (or later)
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x38d60000-0x39abdfff]
PM: Registered nosave memory: [mem 0x39d89000-0x3a92dfff]
PM: Registered nosave memory: [mem 0x3a92e000-0x3b159fff]
PM: Registered nosave memory: [mem 0x3b15a000-0x3b1befff]
PM: Registered nosave memory: [mem 0x3b1c0000-0x3b245fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3dffffff]
PM: Registered nosave memory: [mem 0x3e000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff963cef200000 s119832 r8192 d31720 u262144
pcpu-alloc: s119832 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
Built 1 zonelists, mobility grouping on.  Total pages: 4103923
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16135596K/16676372K available (9458K kernel code, 2479K rwdata, 4052K rodata, 2320K init, 2384K bss, 540776K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
ftrace: allocating 38156 entries in 150 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 928, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.919 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.83 BogoMIPS (lpj=13599676)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux:  Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000003b030000 end: 0x0000003b03ffff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base  0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base  0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-6800K CPU @ 3.40GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (81597.36 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x39d89000-0x3a92dfff] (12210176 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:43:10, date: 11/12/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PME AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb53d000-0xfb53dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb520000-0xfb52ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb53c000-0xfb53c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb539000-0xfb539fff]
pci 0000:00:19.0: reg 0x18: [io  0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb538000-0xfb5383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb530000-0xfb533fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb537000-0xfb5373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb536000-0xfb5367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb535000-0xfb5350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:17c2] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: BAR 3: assigned to efifb
pci 0000:03:00.1: [10de:0fb0] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff]
pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfb300000-0xfb303fff]
pci 0000:06:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x38d60000-0x3bffffff]
e820: reserve RAM buffer [mem 0x39d89000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b1c0000-0x3bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0500-0x057f] has been reserved
system 00:02: [io  0x0400-0x047f] could not be reserved
system 00:02: [io  0x0580-0x059f] has been reserved
system 00:02: [io  0x0600-0x061f] has been reserved
system 00:02: [io  0x0880-0x0883] has been reserved
system 00:02: [io  0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0a00-0x0a0f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 51436K
DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x29dba000-0x2ddba000] (64MB) mapped at [ffff963869dba000-ffff96386ddb9fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1510501390.612:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb538000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb537000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:05:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.14.0-999-generic xhci-hcd
usb usb5: SerialNumber: 0000:05:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.14.0-999-generic xhci-hcd
usb usb6: SerialNumber: 0000:05:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
intel_rdt: Intel RDT L3 allocation detected
intel_rdt: Intel RDT L3DATA allocation detected
intel_rdt: Intel RDT L3CODE allocation detected
intel_rdt: Intel RDT L3 monitoring detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x406f1, pf=0x4, revision=0xb00001d
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1770761762, 0)->(1898847192, -128085430)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0b6641ecc77f1348d81e1ddc5eb0efafef313226'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 9:208:740
acpi LNXCPU:69: hash matches
acpi LNXCPU:3c: hash matches
rtc_cmos 00:01: setting system clock to 2017-11-12 15:43:10 UTC (1510501390)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2320K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 772K
Freeing unused kernel memory: 44K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
dca service started, version 1.12.1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xc impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst 
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfb536000 port 0xfb536200 irq 35
ata4: SATA max UDMA/133 abar m2048@0xfb536000 port 0xfb536280 irq 35
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
MXM: GUID detected in BIOS
checking generic (f1000000 300000) vs hw (e0000000 10000000)
checking generic (f1000000 300000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: NVIDIA GM200 (120020a1)
nouveau 0000:03:00.0: bios: version 84.00.1f.00.01
nouveau 0000:03:00.0: fb: 12288 MiB GDDR5
nouveau 0000:03:00.0: bus: MMIO write of 800000c8 FAULT at 10eb14 [ IBUS ]
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: new high-speed USB device number 2 using ehci-pci
[TTM] Zone  kernel: Available graphics memory: 8162618 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:03:00.0: DRM: VRAM: 12288 MiB
nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
nouveau 0000:03:00.0: DRM: TMDS table version 2.0
nouveau 0000:03:00.0: DRM: DCB version 4.1
nouveau 0000:03:00.0: DRM: DCB outp 00: 01000f02 00020030
nouveau 0000:03:00.0: DRM: DCB outp 01: 02000f00 00000000
nouveau 0000:03:00.0: DRM: DCB outp 02: 04812f96 04400020
nouveau 0000:03:00.0: DRM: DCB outp 03: 04012f92 00020020
nouveau 0000:03:00.0: DRM: DCB outp 04: 04821f86 04400010
nouveau 0000:03:00.0: DRM: DCB outp 05: 04021f82 00020010
nouveau 0000:03:00.0: DRM: DCB outp 07: 02033f62 00020010
nouveau 0000:03:00.0: DRM: DCB outp 08: 02844f76 04400020
nouveau 0000:03:00.0: DRM: DCB outp 09: 02044f72 00020020
nouveau 0000:03:00.0: DRM: DCB outp 10: 01d55ff8 00000000
nouveau 0000:03:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:03:00.0: DRM: DCB conn 01: 01000146
nouveau 0000:03:00.0: DRM: DCB conn 02: 02000246
nouveau 0000:03:00.0: DRM: DCB conn 03: 00010361
nouveau 0000:03:00.0: DRM: DCB conn 04: 00020446
nouveau 0000:03:00.0: DRM: DCB conn 05: 00000570
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-4: New USB device found, idVendor=174c, idProduct=3074
usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-4: Product: AS2107
usb 4-4: Manufacturer: ASMedia
usb 4-4: SerialNumber: USB2.0 Hub
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 4 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:4e:d2:c3
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
nouveau 0000:03:00.0: DRM: failed to create encoder 1/8/0: -19
nouveau 0000:03:00.0: DRM: Virtual-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.SPT3._GTF, AE_NOT_FOUND (20170728/psparse-550)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.SPT2._GTF, AE_NOT_FOUND (20170728/psparse-550)
ata4.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: TOSHIBA-TR150, SAFZ12.3, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.SPT3._GTF, AE_NOT_FOUND (20170728/psparse-550)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT1.SPT2._GTF, AE_NOT_FOUND (20170728/psparse-550)
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA-TR150    12.3 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA-TR150    12.3 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-10: new high-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
pps pps0: new PPS source ptp1
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:cc:6a:4e:d2:c2
igb 0000:06:00.0: eth0: PBA No: 000300-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:06:00.0 enp6s0: renamed from eth0
usb 3-10: New USB device found, idVendor=174c, idProduct=2074
usb 3-10: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-10: Product: AS2107
usb 3-10: Manufacturer: ASMedia
usb 3-10: SerialNumber: USB2.0 Hub
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
usb 3-10.3: new high-speed USB device number 3 using xhci_hcd
usb 3-10.3: New USB device found, idVendor=1a40, idProduct=0101
usb 3-10.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-10.3: Product: USB 2.0 Hub
hub 3-10.3:1.0: USB hub found
hub 3-10.3:1.0: 4 ports detected
nouveau 0000:03:00.0: DRM: allocated 2560x1440 fb: 0x60000, bo ffff963ce09de800
fbcon: nouveaufb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 3399.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024b3bec5, max_idle_ns: 440795366697 ns
Console: switching to colour frame buffer device 320x90
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
usb 3-10.3.3: new low-speed USB device number 4 using xhci_hcd
raid6: sse2x1   gen() 12876 MB/s
raid6: sse2x1   xor()  8795 MB/s
usb 3-10.3.3: New USB device found, idVendor=04f2, idProduct=0833
usb 3-10.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10.3.3: Product: USB Keyboard
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3.3/3-10.3.3:1.0/0003:04F2:0833.0001/input/input2
raid6: sse2x2   gen() 15267 MB/s
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:14.0-10.3.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3.3/3-10.3.3:1.1/0003:04F2:0833.0002/input/input3
usb 3-10.3.4: new full-speed USB device number 5 using xhci_hcd
raid6: sse2x2   xor()  9612 MB/s
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:14.0-10.3.3/input1
raid6: sse2x4   gen() 18114 MB/s
usb 3-10.3.4: New USB device found, idVendor=1532, idProduct=0007
usb 3-10.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10.3.4: Product: DeathAdder
usb 3-10.3.4: Manufacturer: Razer
input: Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3.4/3-10.3.4:1.0/0003:1532:0007.0003/input/input4
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:14.0-10.3.4/input0
raid6: sse2x4   xor() 11391 MB/s
raid6: avx2x1   gen() 21903 MB/s
raid6: avx2x1   xor() 16653 MB/s
raid6: avx2x2   gen() 29227 MB/s
raid6: avx2x2   xor() 17363 MB/s
raid6: avx2x4   gen() 33946 MB/s
raid6: avx2x4   xor() 21144 MB/s
raid6: using algorithm avx2x4 gen() 33946 MB/s
raid6: .... xor() 21144 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 283157ce-b202-4851-862b-5a8dbb66fd47 devid 4 transid 1833 /dev/sdb
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[344]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
 [PCSPP,TRISTATE,EPP]
parport0: irq 0 detected
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (polling).
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
rfkill: input handler disabled
BTRFS: device fsid 17e1263a-3343-4f54-b58a-ac1f44833a39 devid 1 transid 5 /dev/sdb
BTRFS info (device sdb): setting 16 feature flag
BTRFS info (device sdb): use zstd compression
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents
BTRFS info (device sdb): flagging fs with big metadata feature
BTRFS info (device sdb): enabling ssd optimizations
perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3131 > 3126), lowering kernel.perf_event_max_sample_rate to 63750
usb 3-10.3.4: reset full-speed USB device number 5 using xhci_hcd
usb 3-10.3.4: reset full-speed USB device number 5 using xhci_hcd

Return To Zstd Compression System Information